STONE VENEERS

 

 

<< Go back to all products

STONE VENEER

Our stone veneering series are cement based cladding stones with an average thickness of 1 inch. Suitable for both interiors and exteriors. Below are the models available in this selection. Click on any image to see it in larger view. Scroll to bottom to get more detailed info.

 

Aegean 1515
Aegean 1518
Aegean 1511
Aegean 1517
Aegean 1516
Grand Canyon 2015
Grand Canyon 2013
Grand Canyon 2016
Grand Canyon 2014
Grand Canyon 2012
Daca 1221
Daca 1222
Daca 1215
Daca 1219
Daca 1218
Silky Creek 1022
Silky Creek 1019
Silky Creek 1017
Silky Creek 1021
Silky Creek 1020
Modulado Aspero 6605
Modulado Aspero 6602
Modulado Aspero 6607
Modulado Aspero 6601
Modulado Aspero 6604
Modulado Aspero 6603
Fine Castle 0519
Fine Castle 0513
Fine Castle 0514
Fine Castle 0518
Fine Castle 0520
Fine Castle 0517
Rustic Castle 0229
Rustic Castle 0228
Rustic Castle 0223
Rustic Castle 0227
Rustic Castle 0226
Rustic Castle 0216
Layer Stone 1616
Layer Stone 1612
Drystacker 0725
Drystacker 0718
Drystacker 0723
Drystacker 0724
Drystacker 0716
Drystacker 0720
Drystacker 0715
Drystacker 0726
Drystacker 0727
Drystacker 0726
Drystacker 0711
Lydia 2103
Lydia 2101
Lydia 2102
Lydia 2104
Manavia 1802
Manavia 1806
Manavia 1808
Manavia 1812
Manavia 1810
Manavia 1813
Manavia 1814
Manavia 1811
Craton 0419
Craton 0425
Craton 0417
Craton 0423
Craton 0422
Modulado Fino 5614
Modulado Fino 5611
Modulado Fino 5620
Modulado Fino 5621
Modulado Fino 5619
Modulado Fino 5612
Modulado Fino 5622
Modulado Fino 5617
Roughcut 0311
Roughcut 0314
Roughcut 0312
Roughcut 0316

Here are some examples of how they look installed in spaces:

 

 

General Properties:

Material: Cement based.

Thickness: Varies depending on the irregularity of the pieces. Usual range is between 0.5 – 1.5 inches.

Weight: App 7-10 lb / sqft

Use: Both indoors and outdoors.

Dimension and thickness values are average values. Due to irregular shape of the product, each piece is different, but within a close range.

 

Technical Specs:

Frost-thaw resistance as per TS699 standarts:
Mass loss: No
Chipping : No
Breaking : No

Water absorption rate:
Average water absorption by percentage of mass: 12%

Average Density:
1.67 g/cm3

Pressure Resistance as per TS3114 standarts:
7 days after production: 35.2 N/mm2
28 days after production: 37.5 N/mm2
Average breaking load after 28 days: 84276 kgf
Average resistance after 28 days: 37.45 MPa

 

 

<< Go back to all products

In the mood for making a comment / asking a question?

avatar