CLAY BASED BRICK VENEERING SPECS:
Thickness: 0.5 – 0.75″
Dimensions: App 9″ X 2.7″
Weight: 4.5 – 6 lb / sqft
Frost-thaw resistance:
Average mass loss after 50 cycles: 0.20 % (well within the standard range of up to 1.00 %)
Average mass loss after 100 cycles: 0.28 % (well within the standard range of up to 1.00 %)
Average mass loss after 150 cycles: 0.32 % (well within the standard range of up to 1.00 %)
Cracks in structure: No
Cracks on surface: No
Hairline cracks: No
Chipping : No
Breaking : No
Flaking : No
In full compliance with TS-EN 539-2 .
Water Impermeability:
Average water impermeability coefficient (ICXi): 0.86
Highest single value: 0.90
Duration of first drop (Xi) (h) : 2.8
Water impermeability class has been defined as Group 2
Breaking Pressure Point:
Average distance between bottom supports: 153 mm
Average breaking pressure: 0.37 kN
Minimum breaking pressure: 0.31 kN
CEMENT BASED BRICK AND STONE VENEERING SPECS:
Thickness: 0.5 – 2″
Weight: 4.5 – 9 lb / sqft
Frost-thaw resistance as per TS699 standarts:
Mass loss: No
Chipping : No
Breaking : No
Water absorption rate:
Average water absorption by percentage of mass: 12%
Average Density:
1.67 g/cm3
Pressure Resistance as per TS3114 standarts:
7 days after production: 35.2 N/mm2
28 days after production: 37.5 N/mm2
Average breaking load after 28 days: 84276 kgf
Average resistance after 28 days: 37.45 MPa
FIBER PANEL SPECS:
Material: Produced of polyester, stone powder, and fiberglass.
Texture: Looks and feels like natural stone.
Weight: App 1 – 1.5 lb/sqft
Thickness: Between 0.4 – 2 inches depending on the model.
Size: Varies slightly from model to model. Usual size for most models is 53”x 116” (They are at times shipped in 3 pieces, depending on the type of shipment).
Fire Rating: Certified B1 under DIN 4102.
Resizing: Can be cut into desired size and shape by a hand grinder.
Elasticity: Elastic. Suitable for forming vaults and circular structures.
Color: Surface can be painted to any other color if desired.
Pull resistance: 39 MPa as per ISO 527
Elasticity-module – pull: 5246 MPa as per ISO 527
Pull extension: 1.81 MPa as per ISO 527
Bend resistance: 157 MPa as per ISO 178
Elasticity-module – bend: 7030 MPa as per ISO 178
Bend extension: 4.87% as per ISO 178
Izod impact resistance: 55kj/m2 as per ISO 180
Lol-limit oxygen index: 26% as per ISO 4586
Density: 1.4 g/cm3 as per TSEN13501-1+A1:2013
Barkol: 48 as per ASTM D-2583 Co
ENCAUSTIC TILES SPECS:
Material: Marble powder, quartz, cement, natural pigments.
Texture: Smooth. Glossy after polishing.
Weight: 8 – 10 lb/sqft
Thickness: 0,79 inches. After sanding process, tiles get 10-15% thinner.
Size: 7.87” x 7.87”
Joint gaps: Laid without joint gaps. Grout is still applied after installation, in order to smooth out the fine lines and turn the complete surface into a single piece of layer.
Pigment thickness: More than > 0.2”. Surface can be sanded&polished multiple times over the years.
In the mood for making a comment / asking a question?