CLAY BASED BRICK VENEERING

<< Go back to all products

MODULAR THIN BRICK SERIES

Modular thin brick series are clay based fully hand-made thin bricks used for veneering. Below are the color tones available in this selection. Click on any image to see it in larger view. Scroll to bottom to get more detailed info.

Here are some examples of how they look installed in spaces:

General Properties:

Fully hand made.

Material: Clay based.

Thickness: App 0.5″

Dimensions: 2.25″ x 7.625″

Weight: App 4.5 lb / sqft

Use: Both interiors and exteriors.

All natural colors. No pigments are used. Colors are formed using relative tones of earth.

Dimension and thickness values are average values. Due to irregular shape of the product, each piece is different, but within a close range.

Technical Specs:

Water Absorption (5-hour boil):

Average water absorption after submerging in boiling water for 5 hours: 11.9%.

Compressive Strength:

Average compressive strength: 79.9 N/mm2

Method of Conditioning: Dryer at 105 deg C 

Method of Preparation: Surface Ground 

Orientation of Loading: Bed Face 

Coefficient of Variation: 11.4 % 

Crushing Machine: 3000KN 

Machine Number: 90011 

Serial Number: 1746

Thermal Conductivity & Water Vapour Permeability:

Thermal Conductivity P=50%     0.58 W/mK

Thermal Conductivity P=90%    0.64 W/mK

Water Vapour Diffusion Coefficient:  5/10μ 

Freeze-thaw test:

After 100 freeze-thaw cycles;

Observation of through cracks: No

Observation of surface cracks larger than 0.2 mm: No

Observation of chipping, peeling, scaling: No

Observation of fracture: No

Observation of spalling, delamination: No

Units are classified as being F2, i.e. suitable for use in conditions of severe exposure. 

Determination of Soluble Salts:

Active Magnesium: % < 0.005  

Active Sodium: % < 0.005

Active Potassium: % < 0.005

Sodium+Potassium: % < 0.01

Water Soluble Magnesium: % < 0.01

<< Go back to all products